|
(A)
POSTS
---------------------------------------------------------------
(i)
Hot-Dipped Galvanized Steel Posts
These components are fabricated from
113mm, 88mm or 75mm outer diameter and
2.3mm thick steel pipes, and shall have
superior hot-dipped galvanized protection
to comply with ISO 1461 prior to "SuperDURA"
polyester powder coating. The footing
for galvanized steel upright post is
of a grade II concrete, having a minimum
dimension of 300mm diameter and 600mm
in depth. These posts can be surface
mounted if so required.
(ii)
Aluminum Posts
These components are of 113mm, 88mm
or 75mm outer diameters, and are extruded
from 6061-T6 or 6062-T6 aluminum alloys.
The components are cleaned in a six
(6)-bath system, which shall include
a rust inhibitive treatment and yellow
di-chromate coated before applying "SuperDURA"
polyester powder coating. The footing
for the said post is of a grade II concrete,
having a minimum dimension of 300mm
diameter and 600mm in depth. These posts
can be surface mounted if so required.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------
(B)
POLYETHYLENE CAP
All exposed posts tops and pipes ends
are fitted with injection molded high-density
polyethylene cap, stabillized against
ultra violet (UV) degradation and molded
in various colors.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------
(C)
POLYSTER POWDER COATING METAL DECK
-------------------------------------------------------------------------------
(i) Square Metal Deck
The deck covers a minimum 1.4m2 of top
surface area and is of one-piece construction.
It is fabricated from hot-dipped galvanized
perforated metal sheet which complies
with TUV EN 1176 safety standard or
expanded metal sheet, welded with steel
frame and cross brace reinfoced frame
complete with PLASTISOL COATING finish.
The deck is having equally spaced holes
on each side of its frame to provide
flush mounting of other play events
that are attached to the deck. With
this design, it allows same level multiple
decks assemblies, thus providing a surface
area without size limitations.
(ii)
Triangle Deck
This deck covers a minimum 0.8m2 of
top surface area and is of one-piece
construction. It if fabricated from
hot-dipped galvanized performed metal
sheet which complies with TUV EN1176
safet standard or expanded metal sheet,
welded with steel frame and cross brace
reinforced frame complete with PLASTISOL
COATING finish. The deck is having equally
spaced holes on each side of its frame
to provide flush mounting of other play
events that are attached to the deck.
With this design, it allows same level
multiple decks assemblies, thus providing
a surface area without size limitations.
(iii)
Hexagon Deck
This deck covers a minimum 5.76m2 of
top surface area. It is fabricated from
hot-dipped galvanized perforated metal
sheet, which complies with TUV EN1176
safety standard or expanded metal sheet,
welded with steel frame and across brace
reinforced frame complete with PLASTISOL
COATING finish. The construction is
either consisted of two (2) pieces of
half hexagonal metal decks, or six (6)
triangle decks assembled together having
equally spaced holes on each side of
their frames to provide flush mounting
of other play events that are attached
to the decks.
(iv)
Half Deck
This deck covers a minimum 0.72m2 of
top surface area of one-piece construction.
It is fabricated from hot-dipped galvanized
perforated metal sheet which complies
with TUV EN1176 safety standard or expanded
metal sheet, welded with steel frame
and cross brace reinforced frame complete
with PLASTISOL COATING finish.
(v)
Bridge Deck
This deck covers a minimum 2.88m2 of
top surface area, and is fabricated
from hot-dipped galvanized performed
meta sheet which complies with TUV EN1176
safety standard or expanded metal sheet,
welded with steel frame and cross brace
reinforced frame complete with PLASTISOL
COATING or "SuperDURA" Polyester
Powder Coating finish.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------
(D)
POLYETHYLENE SLIDE / TUNNEL
------------------------------------------------------------
(i) Wave Slide
The slide is rotationally molded from
polyethylene consisting of extra durable
compounded-in resin with ultraviolet
stabilizer. Polyethlene slide rails
are at minimum 200mm high from the slide
surface and slide bed way is of minimum
400mm width. The slide has double layer
polythylene wall complete with an average
thickness of 6mm. All wave slide shalll
have the manufacturer's trademark molded-in
to identity the source of the product.
Slide bed shall have no seams or joints.
The slide holder and the slide enclosure
are fabricated from hotd-dipped galvanized
steel with "SuperDURA" polyster
powder coating.
(ii)
Tunnel Slide
Elbows and panels of tube slide are
rotationally molded from polyethylene
consisting of extra durable compounded-in
resin with ultraviolet stabilizers.
The slide polyethylenen wall is of a
minimum 620mm or 760mm (TUV EN1176 safety
standard) inner diameter and is of average
6mm thick. All Tunnel straight sections
and panels shall have the manufacturer's
trademark molded-in to identify the
source of the product. Tunnel slides
shall not have any internal hardware.
Tunnel slides external hardware that
is provided shall have no protrusion
after installation. Slide support is
fabricated from hot-dipped galvanized
steel with "SuperDURA" polyester
powder coating finish.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------
(E)
ROOFING
----------------------------------------------------------------------
(i) Semi-Dome Roof/Econ Roof/Kindi
Roof
The roof is rotationally molded from
polyethylene consisting of extra durable
compounded-in resin with ultra violet
stabilizers. It has a minimum of 5mm
thick plastic double wall construction.
All plastic roofs shall have the manufacturer's
trademark molded-in to identify the
source of the product.
(ii)
Hexagon Rainbow Roof/Hexagon Roof
The roof covers a minimum 5.76m2 of
top surface area and is fabricated from
hot-dipped galvanized perforated metal
welded with steel frame and across brace
reinforced frame complete with PLASTISOL
COATING finish. Rainbow roofs are multi
colored whereas hexagon roofs are of
only single colour.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------
(F)
OVERHEAD CLIMBER
----------------------------------------------------------------------------------------------------------------
(i) Challenge Ladder/Curve Ladder/'S'
Ladder/'U' Challenge Ladder
The ladder has 33mm outer diameter ugns
welded to side ralls. the side ralls
are fabricted from 50mm outer diameter
hot-dipped galvanized pipes. And all
the steel components are "SuperDURA"
Polyester powder coated. The ladder
develops upper body strength and eye/hand
coordination.
(ii)
Loop Beam Overhead Ladder
Both the loop beam and the crossbeam
are fabricated from 33mm outer idamter
hot-dipped galvanized steel pipes with
PLASTISOL COATING finish to prevent
slipping and rusting. All the steel
components are "SuperDURA"
Polyester powder coated. The ladder
provides an alternating swing along
the single center beam to increase the
challenge.
(iii)
Ring Trek/Double Ring Trek/Curve Ring
Trek/'S' Ring Trek/Circle Ring Trek
The ring trek beam is fabricated from
a 50mm outer diameter hot-dipped galvanized
steel pipe and has steel ring hangers
welded in place to ease installation
and reduce maintenance. The ring is
formed on a full circle with a diameter
150mm that is hooked to the hanger and
with PLASTISOL COATING finish to prevent
slipping and rusting. After fabrication,
all the steel components are "SuperDURA"
Polyester powder coated.
(iv)
Sky Rider
The rider is designed to incorporate
a one-piece alumimum (6061-T6 alloy)
extruded beam to ease installation and
reduce maintenance. The beam is designed
to work between 4.5m post centers. Sturdy
rubber bumpers are provided at each
end of the track. The roller assembly
consists of four load supporting wheels
with sealed ball bearings and two lateral
supporting wheels to insure that the
roller assembly does not rub the sides
of the beam. The sky rider handle is
fabricated from 15mm outer diameter
hot-dipped galvanized steel rod with
"SuperDURA" polyester powder
coating finish. The sky rider thus povides
an extra smooth ride along the durable
track.
(v)
Trick Ladder
The trick ladder's undulating hands
grabs/rungs are fabricated from a 33mm
outer diameter hot-dipped galvanized
steel pipe and the support cross bar
is made from 50mm outer diameter pipe
with hot-dipped galvanized finish. All
the steel components are "SuperDURA"
Polyester powder coated. The trick ladder
increases challenge level by adding
additional body movement, and requires
alternating hand coordination.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------
(G)
PANEL
-----------------------
(i) Slot Panel
The slot panel is rotationally molded
from polyethylene consist extra durable
compounded-in resin with ultraviolet
stabilizer. The panel has double layer
of polyethylene wall complete with an
average thickness of 6mm. Each panel
shall have the manufacturer's trademark
molded-in to identify the source of
the product.
(ii)
Safety Rail/Balcony Rail
The safety rails horizontal bar is fabricated
from 33mm outer diameter galvanized
steel pipe and welded with 8 nos. of
27mm outer diameter vertical galvanized
pipes. Gaps shall not be greater than
89mm and less than 210mm between vertical
rungs and posts. After fabrication,
all the steel conponents are "SuperDURA"
Polyester powder coated.
(iii)
Flower/Fish Panel
The panel is fabricated from hot-dipped
galvanized perforated metal sheet welded
with reinforced steel frame and has
either a perfectly cut flower or fish
patterns on it, and completed with "SuperDURA"
Polyester powder coating finish.
(iv)
Bubble Panel
The bubble window panel is fabricated
from 4mm thick optically clear polyethlene
LEXAN, an extremely tough, highly impact
resistant polycarbonate material. The
bubble window is fitted to a panel that
is rotationally molded from polyethylene
consisting of extra durable compounded-in
resin with ultraviolet stabilizers and
shall have the manufacturer's trademark
molded-in to identity the source of
the product. The large LEXAN bubble
offers fun "fish eye" perspective,
and allows easy viewing both in and
out.
(v)
Steering Wheel
The
Steering wheel is easy turning and provides
"drivin" fun. It is fabricated
from high strength 27mm outer diameter
hot-dipped galvanized steel pipes. After
fabrication, all the steel components
are "SuperDURA" Polyester
powder coated.
(vi)
Tic-Tac-Toe/Numbering Panel/Animal Panel
These panels provide safety enclosure
fences or barries and are non-climbable.
They are classic favorite, and develop
strategic thinking. The cylinders forming
the panel barriers are rotationally
molded from polyethylene consisting
of extra dufable component-in resin
with ultraviolet stabilizers of 4mm
thickness and with graphics, wording
or numbers which shall not be raised
above the surface. The Vertical support
bar for each cylinder is made from 25mm
outer diameter galvanized steel rail.
After fabrication, all the steel components
are "SuperDURA" Polyester
powder coated.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------
(H)
ACCESS CLIMBER
-----------------------------------
(i) Arch Climber
The arch climber is designed as a one-piece
unit with curved rungs welded to side
rails, which act as convenient handrails.
The side rails are spaced 600mm aprat
and are fabricated from 50mm outer diameter
hot-dipped galvanized steel pipes. After
fabrication, all the steel components
are "SuperDURA" Polyester
powder coated.
(ii)
Tree Climber
It is a versatile climber with loop-rungs
evenly spaced from ground to deck, and
is fabricated from 33mm outer diameter
hot-dipped galvanized steel pipes, having
a central post fabrication from 50mm
outer diameter of the same material.
After fabrication, all the steel components
are "SuperDURA" Polyester
powder coated. The gaps are greater
than 300mm and less than 270mm.
(iii)
Fireman Post
The classic fireman's post provides
quick descent from 1.0m to 1.6m height
decks, and is fabricated from 50m outer
diameter hot-dipped galvanized steel
pipe. After fabrication, all the steel
components are "SuperDURA"
Polyester powder coated.
(iv)
Curly Climber
A challenging corkscrew-type ladder,
climb up or twirt down! The Climber
has no gaps greater than 300mm and less
than 270mm between coils, and is designed
to prevent children from climbing or
entering into the interior of the coils.
Curly Climber coils are fabricted from
33mm outer diameter hot-dipped galvanized
steel pipe and its center support is
fabricated from 50mm outer diameter
of the same material. After fabrication,
all the steel components are "SuperDURA"
Polyester powder coated.
(v)
Mountain Climber
The mountain climber is a unique challenging
access from ground to various height
decks steps, and it is fabricated from
33mm outer diameter hot-dipped galvanized
round pipe and the support post is fabricated
from 50mm outer diameter of the same
material. The gaps between steps are
between 250mm to 300mm. All fabricated
metal parts are with "SuperDURA"
Polyester powder coating finish. The
Climber builds balance, grip strength
and hand/foot coordination.
(vi)
Cargo Chain Net/Chain Net Climber/Wavy
Chain Net
The net is fabricated from 7.5mm hot-dipped
galvanized chains welded with alternate
rigid 27mm diameter step rungs to form
a one-piece construction. The net is
connected with u-bolts to a deck and
with PLASTISOL COATING finish. The two
hanholds are at the top to help steady
climb, and fabricated from 33mm outer
diameter steel pipes with "SuperDURA"
Polyester powder coating finish. However,
the cargo chain net flares out at the
botton end. The chain net is of parallel
chain netting from the deck to the ground,
and the wavy chain net as its name implied,
wavy! It provides a unique and more
challenging movement than a static or
fixed-movement climber. All steel parts
are Hot Dipped Galvanized to comply
with the 1461 : 1999 requirement.
(vii)
Staircase/Transfer Platform
Transfer decks are fabricated from hot-dipped
galvanized perforated metal are expanded
metal welded with steel frame and cross
brace reinforced frame complete with
PLASTISOL COATING finish. Handrails
and loops are fabricated from 33mm outer
diameter hot-dipped galvanized steel
pipe and are "SuperDURA" Polyester
powder coated. Footplates are fabricated
from 3mm hot-dipped galvanized steel
sheet. Mounting holes are pre-punched.
(viii)
Rope Climber
"Hercules" Climbing Cables
of 16mm outer diameter, is highly UV
resistant with polyester sheathing,
incorporated with central steel wire
of 6 X 6 fiber core strand, and are
configured into 300mm X 30mm lattice
pattern with Huck connecting system
for safety and durability. The rope
web is connected to a deck with two
handholds at the top to help steady
climber ascend to the deck. The rope
climber provides more movement and challenge
than with a tradition ladder design.
(ix)
Vertical Rope Climber
"Hercules" Climbing Cables
of 16mm outer diameter, is highly UV
resistant with polyester sheathing,
incorporated with central steel wire
of 6 X 6 fiber core strand, and are
configured into 300mm X 300mm lattice
pattern with "Huck" connecting
system for safety and durability. This
cylindrically shaped lattice ripe climber
is hanged from a 33mm oter diameter
curved loop steel pipe weided to a supporting
post of 50mm outer diameter, allows
children to climber up and across the
netting. It is also for giving access
to the top level of combination play
sets. All the metal parts are Hot Dipped
Galvanized to comply with the ISO 1461
: 1999 requirement.
(x)
Rock Climber
A steel ramp fabricated from performed
metal sheet and incorporated with footholds,
which is primed with clear arylic thermosetting
solution before plastisol or poly-vinyl
chloride (PVC) coated, is inclined and
attached to a deck. A good quality nylon/polyester
ripe of 16mm outer diameter is fastened
from a rung above the deck for the kid
to pull forwards, thus it provides a
sense of realism while climbing! A pair
of handholds is also provided for easy
and safe ascent onto the deck. All the
metal parts are Hot Dipped Galvanized
to comply with the ISO 1461 : 1999 requirement.
(xi)
Timber/Plastisol Log Climber
Steps of "Changel" hard wood
of size 50m x 75mm or 60mm outer diameter
steel pipe are securely fastened with
stainless steel bolts to the supporting
arch rails of 50mm O/D x 50mm angle
iron. The arch unit is attached to a
deck wheere a good quality nylon rope
of 16mm outer diameter is fastened from
a rung above the deck for the kid to
pull forwards, thus it provides a sense
of realism while climbing! All the metal
parts are Hot Dipped Galvanized to comply
with the ISO 1461 : 1999 requirement,
phosphatizing cleaning washed and dichromate
before having the "SuperDURA"
Polyester powder coated, Whereas the
60mm diameter steel pipe comes complete
with PLASTISOL coating.
(xii)
Single/Two Rung Ladder
An arch steel frame of 33mm outer diameter
with single or two rungs weld across
the bottom end. The ladder is attached
to 0.7mm or 1.omm deck respectively
for safe and easy ascent to the decks.
It is an alternative to having a staircase.
All the steel parts are HOT DIPPED GALVANIZED
to comply with the ISO 1461 : 1999 requirement,
phosphatizing cleaning washed and di-chromate
coated before having "SuperDURA"
Polyester powder coated.
(xiii)
Vertical Tube Tunnel
Several straight tube tunnels of 640mmor
760mm internal diameter (TUV EN 1176
safety standard) x 800mm in length,
and with an average of 6mm thick wall
are connected vertically to the required
deck height. A top "T" junction
tube is connected to the deck via a
panel fastened to both the 113mm outer
diameter steel posts. The tubes are
rotationally molded from polyethylene
consisting of extra durable compounded-in
resin with ultraviolet stabilizer. A
steel bar dome or 4mm thick NEXAN optically
clear polyethylene dome is the one of
the tube sections. A monkey ladder,
of 2 x 50mm outer diameter posts with
wall. All the metal parts are Hot Dipped
Galvanized to comply with the ISO 1461
: 1999 requirement, phosphatizing cleaning
washed and di-chromate before having
the "SuperDURA" Polyester
powder coated.
(xiv)
Block Stepper
This unique cube is fabricated from
performed steel or expanded metal sheets.
All metal parts are HOT DIPPED GALVANIZED
to comply with the ISO 1461 : 1999 requirement,
phosphatizing pressure washed and primed
with a clear acrylic thermosetting solution
before Plastisol baked for safety and
durability. The cubes are bolted together,
to form a wide variety of shapes, and
configuration for climbing, sitting
and game playing.
(xv)
Rainbow Arch Climber
Rainbow Arch Climber is fabricated from
two parallel 50mm O/D steel pipes, having
a semi-circle arch of 2400mm/3000mm/3600mm
diameter x 1200mm/1500mm/1800mm height
respectively. A series of 33mm O/D x
500mm length rungs steel pipes are welded
across the pipes. These pipes are HOT
DIPPED GALVANIZED to comply with the
ISO 1461 : 1999 requirement, phosphatizing
cleaning washed and di-chromate coated
before having "SuperDURA"
Polyester powder coated for safety and
durability.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------
(I)
BRIDGES
-------------------------
(i) Arch Bridge
The 1200mm x 2400mm arch bridge is of
solid welded construction and made of
hot dipped galvanized perforated metal
sheet. The Frame is fabricated from
50mm hot-dipped galvanized round steel
flat bars. The handrails consist of
top and bottom rails that are constructed
of 33mm round pipes joined by sleeve
of 33mm tube, with infill of 33mm tubes.
The 'arch' of the bridge deck is of
100mm height from the side level. All
fabricated metals are with "SuperDURA"
Polyester powder coating except the
bridge deck is plastisol coated finish.
(ii)
Suspension Bridge
The 1200mm x 2400mm bridge is of solid
welded construction and more of hot-dipped
galvanized perforated metal sheet which
is complies with TUV EN 1176 safety
standard. The Frame is fabricated from
50mm hot-dipped galvanized flat bars
and comes together with long safety
ralls or barriers. All fabricated metals
are with "SuperDURA" Polyester
powder coating except the bridge deck
is plastisol coated finishes.
(iii)
Curve Bridge
The 1200m x 2400mm bridge is of solid
welded construction and made of hot-dipped
galvanized perforated metal sheet. The
frame is fabricated from 50mm hot-dipped
galvanized flat bars, and comes together
with curved safety rails. The bridge
is curved 90 degrees to each other.
All fabricated metals are with "SuperDURA"
Polyester powder coating except the
bridge deck is plastisol coated finishes.
(iv)
Clatter Bridge
The bridge planks are pre-assembled
at factory for ease of installation.
Each piece of the clatter bridge planks
is of dimensions 270mm x 1200mm and
is of on-piece construction, fabricated
from hot-dipped galvanized perforted
metal sheet which complies with TUV
EN 1176 safety standard or expanded
metal with Plastisol coating finish.
When assembled, no open gaps will occur
between planks. Plank to plank joints
are pinch proof to the user. Cables
or chains are used in the assembly of
the planks. Clatter briges shall have
a triple rail side enclosures fabricated
from 50mm outer diameter hot-dipped
galvanized steel pipe, curved to match
the curve of the bridge.
(v)
Balancing Log Brige
A beam of "Changel" hard wood
of 70mm x 150mm is suspended by a series
of steel chain connected to two 50mm
outer diameter steel pipe side rails.
Additional side ralls just above them
are provided for as handholds for safety
while crossing the balancing beam. all
the side rails are connected to even
decks of the same height. All steel
parts are HOT DIPPED GALVANIZED to comply
with the ISO 1461 : 1999 requirement,
phosphatizing cleaning washed and di-chromate
coating before having "SuperDURA"
Polyester powder coated.
(vi)
Stepper Bridge
Five perforated metal steps that comply
with TUV EN 1176 safety standard or
expanded metal steps are securely fastened
to steel pipes of 30mm outer diameter
rectangular loops and suspended from
two side rails of 50mm outer diameter.
The steps vary in height and provide
a wavy walking pettern. All steel parts
are HOT DIPPED GALVANIZED to comply
with the ISO 1461 : 1999 requirement,
phosphatizing cleaning washed and di-chromate
coating before having "SuperDURA"
Polyester powder coated.
|
